How to turn on Niryo One ?

Plug the power adapter, and switch the power button. You should see a red light. The robot will start and after about one minute, the LED will become blue [...]

How to turn on Niryo One ? 2017-12-20T08:08:07+00:00

How to turn off Niryo One ?

Press the top button 3 consecutive seconds (wait for the LED to switch to purple), and release to shutdown the robot. Wait a few seconds (the LED will then [...]

How to turn off Niryo One ? 2017-12-20T08:12:19+00:00

What is “Hotspot mode” ?

The robot can either be connected to a Wi-Fi network, or create its own network. When in “hotspot mode”, you can find a new network from your computer starting [...]

What is “Hotspot mode” ? 2017-12-20T08:12:25+00:00

What is “Connected mode” ?

You can choose to connect the robot to a local Wi-Fi network. Go in “settings” pannel and give the login/password of the Wi-Fi. The robot will try to connect [...]

What is “Connected mode” ? 2017-12-20T08:12:30+00:00

How to use the top button ?

The button has 2 functionalities : you can safely shutdown the robot, or switch it to “hotspot mode”. Press the button 3 consecutive seconds (wait for the LED to [...]

How to use the top button ? 2017-12-20T08:12:34+00:00

What is the meaning of the LED color ?

Blue : the robot is in “Hostpot mode” Green : the robot is in “Connected mode” Purple : the robot is currently shutting down Red : on boot, the [...]

What is the meaning of the LED color ? 2017-12-20T08:12:57+00:00

How to upgrade the software on the robot ?

You need to flash the latest image on the Raspberry Pi 3 microSD card. You can download the image here. Once downloaded, don’t forget to unzip the archive. The [...]

How to upgrade the software on the robot ? 2017-12-20T08:13:01+00:00

How to upgrade the firmware on the Niryo Stepper boards ?

You can download the code directly from Niryo github repository (latest version recommended). You will need to install the Arduino IDE software, and install the “Arduino SAMD boards (32-bits [...]

How to upgrade the firmware on the Niryo Stepper boards ? 2017-12-20T08:13:05+00:00