FacebookTwitterYouTubeGoogle+Rss
Reply To: Niryo_one Studio connection to desktop_rviz_simulation2018-06-19T16:12:06+00:00

Forums › Niryo One › How to… › Niryo_one Studio connection to desktop_rviz_simulation › Reply To: Niryo_one Studio connection to desktop_rviz_simulation

FindingNiryo
Participant
June 19, 2018 at 4:08 pm
Post count: 7
#2329

Niryo_one Studio Move Pose <shell WARN “TCP/IP connection failed”>
[ SUCCESS ] [2018-56-19 11:56:52] Sequence Command – Successfully executed Sequence code
rviz shell reports

[WARN] Dropping first 1 trajectory point(s) out of 10, as they occur before the current time. First valid point will be reached in 0.037s

[WARN] Inbouncd TCP/IP connection failed: connection from sender terminated before handshake header received. 0 bytes were received. Please check sender for additional details

Our goal

Niryo wants to democratize robotics, with accessible robots (low-cost and easy to use). Niryo One, first robot made by Niryo, is a 3D printed 6 axis robotic arm, for makers, educators, and researchers. It is powered by Arduino, Raspberry Pi, and ROS.

Newsletter