Forums Niryo One Showcase your Niryo One project Assembly experience RE: Niryo One v2.0 robot Reply To: Assembly experience RE: Niryo One v2.0 robot

roboticshobbyist
Participant
Post count: 8

So, for the past couple days, I have been troubleshooting why I couldn’t connect to the robot.

It turns out the SD Card image provided will not function as is on a Raspberry Pi 3 B+. I removed the Raspberry 3 B+ and installed a Raspberry 3 B.

After that my network could see the Robot but I still could not connect. This was a result of me blocking all inbound connections via my firewall. It needs to be able to connect at least one time without the firewall and then it will function with the firewall. Another option is to create a firewall rule for the IP and Port.

I am now able to connect to the robot. I am having one calibration issue that I am working through. It appears to be an assembly issue that I believe is an easy fix. I hope to have the calibration complete any moment now.