Forums Niryo One Troubleshooting Assembling Niryo One. Stuck at Step 1 connecting the fan.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • aivenhoe
    Participant
    Post count: 2

    Hello dear tinkerers
    I am assembling the niryo one, but I cannot see where I need to connect the 12v fan (https://youtu.be/3f-Ecz0IYLY?t=715). In the video the fan is connected to the main cable. On the kit I have here the fan is loose with a white 2 pin female end (https://imgur.com/a/kaWoiG2).

    Thanks for any tips
    aiv

    • This topic was modified 8 months, 1 week ago by aivenhoe.
    jdman
    Participant
    Post count: 8

    Hi Ivo,
    I believe the fan will connect to the Niryo Shield PCB once you get to building the drawer that fits into the base.
    Could be really cool is you could take some additional high-res pictures (even a diagram) of the cables and in/out connections.
    Seems like there has been some improvements on the cabling since 2.0 videos… thank you

    aivenhoe
    Participant
    Post count: 2

    that was is. thank you :)

    jdman
    Participant
    Post count: 8

    Your welcome. Send us some better pics for the cables if you can and diagram if possible.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.