Forums Niryo One Troubleshooting broken electromagnet connector

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • duck
    Post count: 49

    Hello Niryo-ites!

    I broke my first part today. Opps.

    Not a big issue… I should be able to solder it back together, but the connector to the electromagnet tool is only structurally affixed to the circuit board with a few tiny solder joints.

    I would recommend that you consider a more robust structural solution for the connector in the future since it requires a bit of force to disconnect the plug from the connector and this sort of mishap is likely to happen to others.

    Thank you for all your fine support.

    /ATTACH: Photo of electromagnet tool and detached connector.

    Edouard Renard
    Post count: 239

    Thanks for the info, we’ll look into that and see what we can do to improve the robustness of the connector !

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.