Forums Niryo One Troubleshooting Need help concernig some parts

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • julien terrier
    Participant
    Post count: 2

    Hello,

    first of all congratulation for this amaizing project, eductional and fun in same time.

    With a friend we decided to make “Niryo one” from scratch, we work to STMicrolelectronics so we want to used motor control and motherboard which come from STMicroelectronics.

    we made all 3D printed parts in our fablab and started to assemble Niryo!

    Currently We didn’t have find all parts to achieve it.

    We ordered a piece of the BOM from different supplier, but some parts of niryo are not found, for example torsion spring, I read that this part was customized for Niryo one.

    So can you tell us if it’s possible to find the torsion spring to the unit?

    Thank you so much.
    Have nice week.

    Edouard Renard
    Keymaster
    Post count: 239

    Hi Julien,

    We have packaged all the Niryo-custom parts (torsion spring, custom PCBs, etc) that you need if you want to make the robot from scratch, and have packaged them into a Maker Kit, available here!

    julien terrier
    Participant
    Post count: 2

    Ok thank you for the answer, I will come back to you very soon.

    Regards.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.