Forums › Niryo One › Showcase your Niryo One project › Niryo One Assembled & Active in Maker Space

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • tonbayer
    Participant
    April 17, 2018 at 7:29 am
    Post count: 4
    #2249

    I 3D-printed and assembled Niryo One a couple of weeks ago: Here are the first movements (Test Sequence):
    First movemnets Niryo One
    Compliments for the design and the skillful engineering, and thanks for the clear building instructions.
    The “Golden” foot is because of a shortage of blue PLA material.

    Using learn mode and some fine tuning, it was possible to make a small demo (printing with rubber stamps) at our local Maker Space during a research and development open day ():
    Niryo One printing with rubber stamps at Steyr-Werke maker space
    Niryo One printing with rubber stamps

    • This topic was modified 10 months, 1 week ago by  tonbayer.
    • This topic was modified 10 months, 1 week ago by  tonbayer.
    Edouard Renard
    Keymaster
    April 19, 2018 at 9:03 am
    Post count: 152
    #2253

    Wow that’s great to hear, congratulation on printing and assembling the robot completely ! It seems to work well. Also the golden base makes it quite original.

    Feel free to share more of your content here.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.