Niryo One – Separate electronics parts (Maker Kit)

842,00 ex. VAT

8 in stock

!!! READ THIS BEFORE !!!

This kit does not contain all the parts to assemble Niryo One. You will have to buy yourself some electronics parts (Raspberry Pi 3B, …) and mechanical parts. Also, you will have to 3D print the robot by yourself.

Before you continue, make sure that you understand this. This kit is not a beginner kit and we don’t provide all the parts required to assemble Niryo One.

–> Here is what you get with this Maker Kit <–

And here is the complete BOM required to build Niryo One. With this list you can check what items you need to buy yourself. You can find the STL files on our github account.

8 in stock

SKU: MK0001G1 Category:

Description

On this kit we have included all the parts that are custom to Niryo One (list here). You can find the complete required BOM to assemble Niryo One here.

Electrical parts:

  • Top button
  • Wirings 1,2,3 & 4
  • Ribbon cable 30 wires
  • DC connector + wire connected to switch
  • Niryo Panel for the back of the robot
  • Niryo Shield for Raspberry Pi 3B
  • Switch
  • Fan – 12V
  • Niryo Motor 1 (Niryo Stepper, configured and tested)
  • Niryo Motor 2 (Niryo Stepper, configured and tested)
  • Niryo Motor 3 (Niryo Stepper, configured and tested)
  • Niryo Motor 4 (Dynamixel XL-430, configured and tested)
  • Niryo Motor 5 (Dynamixel XL-430, configured and tested)
  • Niryo Motor 6 (Dynamixel XL-320, configured and tested)

Mechanical parts:

  • Aluminum tube *2
  • Coupling shaft red motor
  • Coupling shaft green motor
  • Coupling shaft blue motor
  • Foot + screw *4
  • Foot suction cup *4
  • Niryo One label for the back of the robot
  • Torsion spring

After you order this kit, buy the extra required parts, and 3D print the blue and black parts of the robot (STLs here), you will have to assemble the robot. You can find an assembly guide on our website.